Integrated Nanosystems Research Facility

BiON Users,

The BiON is fully shutdown until Friday April 20th due to the Calit2 Humidification Project 4/14-4/20. We’ve received word that work should NOT be conducted in the BiON while the ventilation is offline.

INRF Staff

BiON Users,

TSS will be on-site at roughly 9:30AM tomorrow to finish re certifying some of the solvent benches in the BiON. Please be prepared to work around them allowing them to perform the work. It should be a minor amount of time per bench.

Thanks,

Staff

BiON Users,

The 3 wet etch rooms are currently offline as staff looks further into the lab bench re-certifications. You may notice the electronic keycards not allow access into these 3 wet etch rooms as a result.

-Staff

BiON Users,

The 3 wet etch rooms are currently offline as staff looks further into the lab bench re-certifications. You may notice the electronic keycards not allow access into these 3 wet etch rooms as a result.

-Staff

BiON Users,

For those that didn’t notice this morning, the BiON is once again available for use and it is ok to enter.

STAFF

All INRF and BiON Users:
Reminder: Monday July 31st, 2017 from 3:00PM – 4:30PM in location Calit2 Room 3008 we are hosting the last make-up session for those that missed the June 2017 All Hands Event  Users that do not attend one of these events will be restricted lab access as attendance is mandatory.
The last make-up session this summer will be this Monday July 31st, 2017 in Calit2 Room 3008 from 3:00PM – 4:00PM , after which there may only be one in the Fall should demand and a need be there.
For these make-up sessions, please RSVP to stevenm4@uci.edu and in the subject line please use “Make-Up Session 2017”

Thank You,

INRF Staff
All INRF and BiON Users:
Reminder: This Monday July 10th, 2017 from 3:00PM – 4:30PM in location Calit2 Room 3008 we are hosting a make-up session for those that missed the June 2017 All Hands Event.  Users that do not attend one of these events will be restricted lab access as attendance is mandatory.
The last make-up session this summer will occur Monday July 31st, 2017 in Calit2 Room 3008 from 3:00PM – 4:00PM , after which there may only be one in the Fall should demand and a need be there.
For these make-up sessions, please RSVP to stevenm4@uci.edu and in the subject line please use “Make-Up Session 2017”

Thank You,

INRF Staff

INRF & BiON  Users and Affiliates,

This years’ mandatory All Hands meeting  will be held on Wednesday, June 28th 2017 at 10:00 AM in the Calit2 Auditorium.  Please see the attached flyer for the event here: 2017 All Hands Flyer

A pizza lunch for all attendees to the meeting will follow afterwards starting at approximately 11:30AM.

The INRF and BiON annual All Hands meeting is a chance for all affiliates of the facilities to come and hear about the latest news and updates found within our labs.  This event will include short presentations from collaborating industry partners that bring with them exciting opportunities housed in our clean rooms.  New and exciting equipment and/or process technologies recently installed or coming soon into the lab spaces will also be presented.  EH&S will also present and discuss relevant safety information that will serve invaluable to all users.  This event is mandatory for all Users in the facility.

Please RSVP to stevenm4@uci.edu and in the subject line please use “RSVP All Hands”.

Thank You,

INRF Staff

All INRF and BiON Users,

Reminder: Both INRF and BiON lab entrances are now done through the Forged System via Chrome

All equipment in both the INRF and BiON are also now operated through the Forged System via Chrome.

*There should be no more instances of the past Legacy System in operation, either for tools or for Lab Log in.

Please do NOT start playing around with netbooks or computers looking for the Legacy System or changing computer settings.

Please do NOT access the Latch System.

Please do NOT modify hardware (cables, latch boxes, etc).

Please only use the Chrome browser and the Forged website on lab computers and netbooks.

Everything is now universally done through the Forged System via Chrome.

If you have an issue with Forged system operation, please first check that your User Profile is fully complete, updated, and accurate. Then once that is verified contact staff for assistance vs. trying to change things yourself.

While we’re on the topic of Forged: Occasionally there may be rare internet disconnects (none have been reported today), and may find a computer with the internet disconnected logo shown below.

If you find that this is the case, please Right Click on the wireless and “Disconnect”. After waiting a few seconds, you can Right Click again and “Connect”.

Notice to Users using HF:
We are seeing an increased usage of 48% HF being used.  All 48% HF must be processed in Teflon containers not poly Styrofoam and in addition these containers must be in a secondary container so as to keep the entire system and process in double containment.
The INRF does not provide Teflon containers so users must provide their own.
INRF Staff